ACRS Certificates

Manufacture of Cold-Formed Hollow Sections
to AS/NZS 1163 and BS EN 10219

Current Certificate holders are as follows (click on the certificate numbers to see Scope of Certification details)

NOTES
  1. All certificates are current for the Calendar year, 1 January to 31 December.
  2. An ACRS Certificate is the statement of conformity issued by the Authority which attests that the Firm named on the Certificate below:
    a) conforms to the Scheme Rules and relevant Product Requirements; and
    b) is subject to Evaluation by the Authority.
  3. Please note, ACRS certificates may be updated from time to time. All ACRS certificates are therefore uncontrolled when printed, or downloaded. Always check the scope and detail of an ACRS certificate by viewing it from this site.
  4. If you have any questions regarding ACRS certificates, please contact ACRS office.

There are three classes of ACRS Certificate that may be displayed on this page: Producer Certificates, Technical Approval Certificates, and Non-Producer Certificates.

A Producer Certificate is issued for the listed Scheme Approved Materials currently produced by the Certified Firm and supplied to an AS/NZS or other published Standard.
A Technical Approval Certificate is issued by the Authority for Scheme Approved Materials supplied to a technical specification not otherwise eligible for a Producer Certificate to provide information on the technical evaluation of the performance of the manufacturer’s product or kit listed on the Certificate.
A Non-Producer Certificate is issued by the Authority where the listed Assessable Materials are not currently produced by the Certified Firm, for Approval by the Authority. Such materials will be subject to review by the Authority and issue of a Producer Certificate before any recommencement of supply by the Certified Firm.

Please refer to the ACRS Product Scheme Rules (ADM 002) and List of Applicable Product Requirements (ADM 002-01) for full details (available on this website).
Company Location City/State Country Status Date Certificate Type Tag Marking
Australian Tube Mills  Somerton  VIC  Australia  Voluntary Relinquishment  12-11-11  N/A 
Australian Tube Mills  Newcastle  NSW  Australia  Certified  12-11-11  111103 Product- AS/NZS 
Australian Tube Mills  Acacia Ridge  QLD  Australia  Certified  12-11-11  111104 Product- AS/NZS 
Australian Tube Mills   Sakai  Osaka  Japan  Certified  07-05-12  120504 Product- AS/NZS 
Nippon Steel Corporation  Himeji-Shi   Hyōgo  Japan  Certified  19-08-13  130801 Product- AS/NZS 
New Zealand Steel  Glenbrook    New Zealand  Certified  17-12-14  141202 Product- AS/NZS 
Orrcon Manufacturing Pty Ltd   Salisbury  QLD  Australia  Certified  27-05-16  160507 Product- AS/NZS 
Australian Tube Mills  Shen-Kang Hsiang  Changhua  Taiwan  Certified  30-11-16  161101 Product- AS/NZS 
Australian Tube Mills    Tokyo  Japan  Certified  30-11-16  161102 Product- AS/NZS 
Australian Pipe and Tube  Ravenhall  VIC  Australia  Certified  30-11-16  161104 Product- AS/NZS 
Saha Thai Steel Pipe Public Company Limited    Samuthprakarn  Thailand  Certified  31-05-18  180503 Product- AS/NZS 
Saha Thai Steel Pipe Public Company Limited     Ayutthaya  Thailand   Certified  31-05-18  180504 Product- AS/NZS 

jas-anz

About ACRS

The Australasian Certification Authority for Reinforcing and Structural Steels (“ACRS”) owns and administers three consumer-oriented, independent, expert, not-for-profit, third-party steel certification schemes: Product Conformity, Product Traceability, and Quality Systems.

Our Contacts

Suite 118, 133 Alexander St
Crows Nest NSW Australia
+61 2 9965 7216
Email: info@steelcertification.com
Post: PO Box 1369 CROWS NEST NSW 1585 AUSTRALIA
ACRS Member Companies

ACRS member companies support and represent a balanced range of interests, including government, specifiers, builders certifiers and suppliers. ACRS members endorse ACRS certification though their organisations and practice.